Air Manifolds (also called Air Distributors) are used to enable more than one keg being dispensed from a single regulator. Our manifolds are constructed of high-quality Aluminum with chrome plated brass valves. Our valves feature 1/4" MFL (Male Flared) ends.
The MFL end allows you to use this product with multiple barbed ends (Called barbed swivel nuts). We offer these in 1/4" and 5/16" ID which fit the lines used for gas. The 1/4" swivel nut will fit 3/16" and 1/4" ID hose. The 5/16 barb will work with 5/16 ID (The most common size for gas hose) or 3/8" ID hose. The size of your gas hose will be indicated on the side of the hose. It will specify O.D (outside diameter) and I.D. (Inside diameter) You need the I.D. These valves include a CHECK VALVE. It is very important you have a check valve to prevent backflow between getting into your Air Manifold (Air Distributor). This valve includes a cupped washer for a good seal when purchased with a swivel nut.