1. High Flow Single Product Dual Guage Primary CO2 Regulator - MFL Outlet

    $52.95
    • Built and tested in the USA!
    • Built in accordance with UL Standard 252 and the requirements of MIL-STD-105E
    • Built in O-ring Seal to CO2 cylinder, don't have to keep up with fiber washer!
    • Stays on pressure even as your CO2 cylinder goes down in volume..
    • Available in many configurations to fit your needs, including primary and secondary models.
    • Rebuild kits are available so you can keep this regulator in service indefinitely.  
    • Contains a 10 Micron Filter built in to keep contaminants out of regulator
    • Comes with 1/4" MFL ends on check valve.  Pick 5/16" or 1/4" barbed swivel nuts depending on the size of the hose you will be using.
    • Comes with a 2 year HBS Warranty
    • *** also note, Available in many configurations to fit your needs, including primary and secondary models See our other listings!.


    WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer, birth defects and other reproductive harm. For more information go to: https://www.p65warnings.ca.gov/
  2. 2-Product Dual Body Primary CO2 Regulator, MFL Valves

    $109.95

    General Info

    • Two 60 lb and one 2,000 lb gauges
    • "set and forget" set screw to maintain pressure
    • Two MFL Check Valves for use with mulitple size hoses (with proper swivel nuts)
    • CGA320 Inlet
    • UL Rated Commercial Beer Regulator
    • Made in the USA!


    WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer, birth defects and other reproductive harm. For more information go to: https://www.p65warnings.ca.gov/
  3. Shut Off Valve, MFL, for use on Regulators or Manifolds / Distributors

    $6.95

    Details

    • 1/4" MPT Inlet and a 1/4" MFL
    • Shut-Off Valve w/ check valve
    • Pick the size barbed swivel nut you need!
    • Includes cupped washer with swivel nut purchase
    • MFL quick fitting allows for easy cleanout and change over
    • Heavy Duty Chrome plated brass constructions
    • Handle and go all the way left or right for shut off (ambidextrous)


    WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer, birth defects and other reproductive harm. For more information go to: https://www.p65warnings.ca.gov/
  4. High Flow Single Product Dual Guage Primary CO2 Regulator - MFL Outlet

    $52.95
    • Built and tested in the USA!
    • Built in accordance with UL Standard 252 and the requirements of MIL-STD-105E
    • Built in O-ring Seal to CO2 cylinder, don't have to keep up with fiber washer!
    • Stays on pressure even as your CO2 cylinder goes down in volume..
    • Available in many configurations to fit your needs, including primary and secondary models.
    • Rebuild kits are available so you can keep this regulator in service indefinitely.  
    • Contains a 10 Micron Filter built in to keep contaminants out of regulator
    • Comes with 1/4" MFL ends on check valve.  Pick 5/16" or 1/4" barbed swivel nuts depending on the size of the hose you will be using.
    • Comes with a 2 year HBS Warranty
    • *** also note, Available in many configurations to fit your needs, including primary and secondary models See our other listings!


    WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer, birth defects and other reproductive harm. For more information go to: https://www.p65warnings.ca.gov/
  5. Taprite Brand
  6. Made is USA
  7. UL Rated, Commercial Grade Regulator!
  8. Used to regulate the pressure to a keg individually
  9. Ten 60lb pressure gauges
  10. 5/16" inlet barb, and ten 1/4" MFL outlets w/ shutoffs
  11. Forged brass body


  12. WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer, birth defects and other reproductive harm. For more information go to: https://www.p65warnings.ca.gov/