March Pump 815 Plastic In-Line Beer Pump March Pump 815 Plastic In-Line Beer Pump March Pump's 815-PL Beer Pump is an American seal-less centrifugal magnetic drive pump and is ideal for home brewing. It's capable of generating a maximum flow of 7 gallons per minute at 4.5 feet, and its maximum head is 18.6 Feet (or around 8PSI). The standard wet end (the materials that come into contact with the solution) is composed of Polysulfone, Stainless Steel, Teflon, Silicone and Ryton/Teflon/Glass. The inlet connection is 0.5 inch male pipe thread, and the outlet is 0.5 inch male pipe thread. The standard motor is a 1 Phase 115V or 230V 0.04 Horsepower fan cooled motor, which can be run on either 50 or 60 hertz (there are performance differences between the hertz options). The 815-PL Beer Pump motor has a six foot cord, a plug, and a base. The maximum internal pressure the pump can tolerate is 50PSI, and the maximum liquid temperature is 250 Fahrenheit or 121 Celsius. To determine if the March 815-PL Beer Pump is suitable for your application, please contact March Pump. 150-0018 174.99 174.99

March Pump 815 Plastic In-Line Beer Pump

150-0018
$174.99

Availability: Out of stock

Condition: New

March Pump's 815-PL Beer Pump is an American seal-less centrifugal magnetic drive pump and is ideal for home brewing. It's capable of generating a maximum flow of 7 gallons per minute at 4.5 feet, and its maximum head is 18.6 Feet (or around 8PSI). The standard wet end (the materials that come into contact with the solution) is composed of Polysulfone, Stainless Steel, Teflon, Silicone and Ryton/Teflon/Glass. The inlet connection is 0.5 inch male pipe thread, and the outlet is 0.5 inch male pipe thread. The standard motor is a 1 Phase 115V or 230V 0.04 Horsepower fan cooled motor, which can be run on either 50 or 60 hertz (there are performance differences between the hertz options). The 815-PL Beer Pump motor has a six foot cord, a plug, and a base. The maximum internal pressure the pump can tolerate is 50PSI, and the maximum liquid temperature is 250 Fahrenheit or 121 Celsius. To determine if the March 815-PL Beer Pump is suitable for your application, please contact March Pump.

General Info

  • Type: Centrifugal Mag Drive
  • Inlet 1/2" MPT Outlet 1/2"MPT
  • Polysulfone(Front Housing) Stainless Steel(Rear Housing and Shaft), Teflon (Thrust Washer), Silicone (O-Ring), Ryton/Teflon/Glass (Impeller)
  • Electrical 115V 50/60HZ
  • Non-Submersible
  • Can handle liquids of 250F
  • Materials are FDA Food Compliant
  • Components are UL Recognized

Deal of the Day

Sorry, but today's deal has already sold out. Please check back tomorrow.

CONNECT

Be the first to know what we are up to. Follow us!